Samura Reptile Cleaver 158 mm, with Engraving
158 mm / SKU: SRP-0040G
€169,99
VAT included
The edge, in numbers
The engraved version of the Samura Reptile 158 mm cleaver, for chopping and portioning meat and fish. AUS-10 stainless steel blade (59–61 HRC), convex edge and ribbed stainless steel handle.
- Blade material
- AUS-10
- Hardness
- 59–61 HRC
- Edge type
- Convex edge
- Blade length
- 158 mmBlade 158 mm of 301 mm overall
The details
A closer look
This is the engraved version of the Samura Reptile cleaver, with a 158 mm blade made for meat and fish. Reach for it when you want to chop and portion meat, break down larger cuts or divide fish into portions. It combines an AUS-10 stainless steel blade and a convex edge with a ribbed stainless steel handle.
Blade and steel
The blade is made from a single layer of AUS-10 stainless steel and hardened to 59–61 HRC. Steel at this hardness holds its edge well, so you need to sharpen less often. AUS-10 is a corrosion-resistant stainless steel; washing and drying the blade soon after use helps keep it in good condition.
The cleaver has the convex sharpening that is typical of the Reptile series: its bevel curves gently towards the cutting line instead of being ground flat. The blade is 158 mm long and 70 mm high, with a satin finish.
Handle and balance
The silver handle is made of stainless steel and has the ribbed shape of the Reptile series. SAMURA designed the series around an ultra-light weight, so the cleaver sits comfortably in your hand whatever you are preparing. It weighs 160 g net and is 301 mm long overall.
Best uses
- Chopping meat into portions
- Breaking down larger cuts of meat
- Chopping meat finely by hand
- Cutting and portioning fish
Care and sharpening
Before first use, rinse the cleaver with hot water and wipe it dry. Wash it by hand with non-abrasive materials and dry it straight away; a dishwasher is not recommended, and the cleaver should not sit in the sink for long. Work on wooden or plastic boards, never on glass, take care with food that contains bones, and keep frozen food for a double-sided saw knife with a serrated blade. Store the cleaver in a brush block or knife holder where the blade does not touch metal items, hone it on a rod between sharpenings and sharpen it on a whetstone at the original factory bevel angle of 15–17°.
About the Reptile series
The Reptile series draws on the Mesozoic era, when giant reptiles roamed the Earth, and combines heritage with contemporary design. Its knives pair AUS-10 stainless steel blades with ribbed stainless steel handles and, like all SAMURA knives, come with a 2-year warranty.
Key features
- Engraved version of the Reptile 158 mm cleaver
- AUS-10 stainless steel blade, 59–61 HRC
- Convex edge, satin finish, 70 mm blade height
- Ribbed stainless steel handle, 160 g net, 301 mm overall
- 2-year SAMURA warranty
Specifications
Technical details
| Series | Reptile |
|---|---|
| Knife type | Cleaver |
| Purpose | Meat, Fish |
| Blade length | 158 mm |
| Total length | 301 mm |
| Blade height | 70 mm |
| Total width | 20 mm |
| Net weight | 160 g |
| Blade material | AUS-10 stainless steel |
| Hardness | 59–61 HRC |
| Steel layers | 1 |
| Blade finish | Satin |
| Edge type | Convex edge |
| Handle material | Stainless steel |
| Handle color | Silver |
| Dishwasher safe | No |
| Package dimensions | 34.4 × 10.3 × 3.5 cm |
| SKU | SRP-0040G |
| EAN | 4751029325112 |
Specifications: SAMURA product data
Care & sharpening
Keep it sharp
- Before first use, rinse with hot water and wipe dry.
- Use only on wooden or plastic cutting boards, never on glass.
- Take care with food that contains bones: use a SAMURA cleaver for meat and bones and a double-sided saw knife with a serrated blade for frozen food.
- Clean by hand with non-abrasive materials and wipe dry. A dishwasher is not recommended.
- Do not leave knives in the sink for a long time.
- Store in a brush block or knife holder so that the blade does not touch metal items.
- Sharpen on a whetstone and keep the original factory bevel angle of 15–17°. Use a honing rod between sharpenings, moving the edge along the rod from the handle to the point.
- Never test sharpness with bare hands; use a piece of paper.
Sold out
In stock now: Cleavers
BLACK NOVEMBER −30%
AUS-8 · 58–59 HRC · 180 mm
Mo-V Cleaver 180 mm
BLACK NOVEMBER −30%
AUS-8 · 58–59 HRC · 180 mm
Harakiri Cleaver 180 mm, Black Handle
BLACK NOVEMBER −30%
AUS-8 · 58–59 HRC · 180 mm
Butcher Cleaver 180 mm
BLACK NOVEMBER −30%
AUS-8 · 58–59 HRC · 180 mm
Mo-V Stonewash Cleaver 180 mm
More from Reptile
More from Reptile.
BLACK NOVEMBER −30%
AUS-10 · 59–61 HRC
Reptile Knife Set, 3 pcs
Sold out
AUS-10 · 59–61 HRC · 235 mm
Reptile Bread Knife 235 mm
Sold out
AUS-10 · 59–61 HRC · 252 mm
Reptile Fillet Knife Swordfish 252 mm
Sold out
AUS-10 · 59–61 HRC · 168 mm
Reptile Utility Knife 168 mm
What steel is the Samura Reptile Cleaver 158 mm, with Engraving made of?
The blade is made of AUS-10 stainless steel. It is hardened to 59–61 HRC.
How long is the blade?
The blade is 158 mm long. The total length is 301 mm.
What kind of edge does it have?
Edge type: Convex edge.
How do I keep it sharp?
Wash it by hand, dry it straight away and cut on a wooden or plastic board.
How fast is delivery, and can I return it?
Standard shipping is free from €79 and EU delivery usually takes 2–5 business days. You can return it within 14 days, and it has a 2-year legal guarantee.
Four reasons to choose SAMURA
-
Ultra-sharp from the first cut
Steel guideJapanese-grade AUS-8, AUS-10, VG-10 and Damascus steels, hardened to 58–61 HRC and sharpened to a razor-sharp, precise edge.
-
Premium quality, fair price
All seriesThe steel, finish and design of high-end Japanese-style knives without the luxury mark-up: a premium knife you can use every day.
-
Packaged to be given
Premium SAMURA packaging makes every knife and set a ready-made gift for anyone who loves to cook.
-
Build your own collection
Every series offers matching knives for every task. Complete one series or combine your favourites across collections.










