BLACK NOVEMBER −30% on all knives Only in November · no code · until 30 November · Free EU shipping from €79Shop the knives

Okinawa series

Samura Okinawa Yanagiba Knife 270 mm

270 mm / SKU: SO-0111

€62,99

VAT included

Sold out

Get an email when it is back

We use your email address only for this notice.

The edge, in numbers

A long Japanese-style yanagiba for slicing fish fillets, sushi and sashimi, and for vegetables. The 270 mm single-bevel blade is AUS-8 stainless steel, 58–59 HRC, with a rosewood handle.

Blade material
AUS-8
Hardness
58–59 HRC
Edge type
Single-bevel edge
Blade length
270 mm
Blade 270 mm of 425 mm overall

The details

A closer look

The Samura Okinawa yanagiba knife is a long Japanese-style slicer with a 270 mm single-bevel blade. It lets you slice a fish fillet in a single, effortless motion, and it handles vegetables too. The yanagiba is traditionally known as the sushi and sashimi knife, but you can use it for other cuisines too.

Blade and steel

The blade is a single layer of AUS-8 stainless steel, hardened to 58–59 HRC. AUS-8 is a corrosion-resistant steel, and this hardness lets the knife deal with tender food while staying durable through years of use. When the edge needs attention, you can restore it on a whetstone. The blade is 33 mm high.

Okinawa knives come with single-bevel or double-bevel blades depending on the model, and this yanagiba has a single-bevel edge. It is ground on one side only, while the other side stays flat, so you sharpen it differently from a double-bevel knife (see Care and sharpening below).

Handle and balance

Like every knife in the Okinawa series, this yanagiba has a rosewood handle. A nylon bolster on the handle adds balance, which matters on a blade as long as this one. The knife weighs 226 g net and measures 425 mm overall.

Best uses

  • Slicing fish fillets
  • Slicing fish for sushi and sashimi
  • Preparing your favourite Japanese dishes
  • Slicing vegetables

Care and sharpening

Before first use, rinse the knife with hot water and wipe it dry. Wash it by hand with non-abrasive materials, dry it and do not leave it in the sink for long; a dishwasher is not recommended. Cut on wooden or plastic boards, never on glass, and use a SAMURA cleaver for meat and bones and a double-sided serrated saw knife for frozen food. Sharpen on a whetstone at the original factory bevel angle of 15–17°: work the bevelled side until a uniform burr appears, then pass the flat side lightly over the stone a few times, and use a honing rod between sharpenings.

About the Okinawa series

The Okinawa series brings together modern technology and cultural heritage, reflecting SAMURA's deep respect for Japanese knife-making traditions. Its corrosion-resistant AUS-8 steel blades are crafted in classic Japanese shapes.

Key features

  • AUS-8 stainless steel blade, 58–59 HRC
  • 270 mm blade with a single-bevel edge
  • Rosewood handle with nylon bolster
  • 425 mm overall, 226 g net weight
  • 2-year warranty

Specifications

Technical details

Specifications of Samura Okinawa Yanagiba Knife 270 mm
SeriesOkinawa
Knife typeYanagiba knife
PurposeFish, Vegetables & fruits
Blade length270 mm
Total length425 mm
Blade height33 mm
Total width23 mm
Net weight226 g
Blade materialAUS-8 stainless steel
Hardness58–59 HRC
Steel layers1
Edge typeSingle-bevel edge
Handle materialRosewood
BolsterNylon
Dishwasher safeNo
Package dimensions46 × 7.4 × 3.4 cm
SKUSO-0111
EAN4751029322364

Specifications: SAMURA product data

Care & sharpening

Keep it sharp

  • Before first use, rinse with hot water and wipe dry.
  • Use only on wooden or plastic cutting boards, never on glass.
  • Take care with food that contains bones: use a SAMURA cleaver for meat and bones and a double-sided saw knife with a serrated blade for frozen food.
  • Clean by hand with non-abrasive materials and wipe dry. A dishwasher is not recommended.
  • Do not leave knives in the sink for a long time.
  • Store in a brush block or knife holder so that the blade does not touch metal items.
  • Sharpen on a whetstone and keep the original factory bevel angle of 15–17°. Use a honing rod between sharpenings, moving the edge along the rod from the handle to the point.
  • Single-bevel blade: on the whetstone sharpen the bevelled side until a uniform burr appears, then pass the flat side lightly over the stone a few times.
  • Never test sharpness with bare hands; use a piece of paper.

Care and keep

Care kit for this knife

Chosen for a single-bevel edge: #1000/#3000 and #8000 stones for sharpening by hand along the bevel, a TPU cutting board and a magnetic holder.

Samura Combination Whetstone, #1000/#3000, 185 × 65 × 32 mm – main view

Combination Whetstone, #1000/#3000, 185 × 65 × 32 mm

€49,99

Samura Whetstone, #8000 – main view

Whetstone, #8000

€37,99

Samura TPU Cutting Board, Red – main view

TPU Cutting Board, Red

€21,99

Samura Road Block Magnetic Knife Holder – main view

Road Block Magnetic Knife Holder

€75,99

Sold out

In stock now: Slicing knives

Samura Okinawa Stonewash Yanagiba Knife 270 mm – main view BLACK NOVEMBER −30%

AUS-8 · 58–59 HRC · 270 mm

Okinawa Stonewash Yanagiba Knife 270 mm

€68,99€48,30 with BLACK NOVEMBER

Samura Reptile Slicing Knife 274 mm – main view BLACK NOVEMBER −30%

AUS-10 · 59–61 HRC · 274 mm

Reptile Slicing Knife 274 mm

€90,99€63,70 with BLACK NOVEMBER

Samura Mo-V Long Slicer Knife 251 mm – main view BLACK NOVEMBER −30%

AUS-8 · 58–59 HRC · 251 mm

Mo-V Long Slicer Knife 251 mm

€52,99€37,10 with BLACK NOVEMBER

Samura Harakiri Long Slicer Knife 290 mm, Black Handle – main view BLACK NOVEMBER −30%

AUS-8 · 58–59 HRC · 290 mm

Harakiri Long Slicer Knife 290 mm, Black Handle

€29,99€21,00 with BLACK NOVEMBER

More from Okinawa

More from Okinawa.

Samura Okinawa Slicing Knife Tanto 230 mm – main view BLACK NOVEMBER −30%

AUS-8 · 58–59 HRC · 230 mm

Okinawa Slicing Knife Tanto 230 mm

€62,99€44,10 with BLACK NOVEMBER

Samura Okinawa Deba Knife 170 mm – main view BLACK NOVEMBER −30%

AUS-8 · 58–59 HRC · 170 mm

Okinawa Deba Knife 170 mm

€58,99€41,30 with BLACK NOVEMBER

Samura Okinawa Yanagiba Knife 240 mm – main view Sold out

AUS-8 · 58–59 HRC · 240 mm

Okinawa Yanagiba Knife 240 mm

€58,99

Samura Okinawa Nakiri Knife 172 mm – main view BLACK NOVEMBER −30%

AUS-8 · 58–59 HRC · 172 mm

Okinawa Nakiri Knife 172 mm

€58,99€41,30 with BLACK NOVEMBER

Questions

Questions and answers

Need help choosing? Write to us.

Contact us
What steel is the Samura Okinawa Yanagiba Knife 270 mm made of?

The blade is made of AUS-8 stainless steel. It is hardened to 58–59 HRC.

How long is the blade?

The blade is 270 mm long. The total length is 425 mm.

What kind of edge does it have?

Edge type: Single-bevel edge.

How do I keep it sharp?

Wash it by hand, dry it straight away and cut on a wooden or plastic board. Chosen for a single-bevel edge: #1000/#3000 and #8000 stones for sharpening by hand along the bevel, a TPU cutting board and a magnetic holder.

How fast is delivery, and can I return it?

Standard shipping is free from €79 and EU delivery usually takes 2–5 business days. You can return it within 14 days, and it has a 2-year legal guarantee.

Four reasons to choose SAMURA

  • Ultra-sharp from the first cut

    Japanese-grade AUS-8, AUS-10, VG-10 and Damascus steels, hardened to 58–61 HRC and sharpened to a razor-sharp, precise edge.

    Steel guide
  • Premium quality, fair price

    The steel, finish and design of high-end Japanese-style knives without the luxury mark-up: a premium knife you can use every day.

    All series
  • Packaged to be given

    Premium SAMURA packaging makes every knife and set a ready-made gift for anyone who loves to cook.

  • Build your own collection

    Every series offers matching knives for every task. Complete one series or combine your favourites across collections.